Difference between revisions of "Enabling Client DHCP"
(→Enabling DHCP with Hostname) |
(→Enabling DHCP with Hostname) |
||
Line 1: | Line 1: | ||
==== Enabling DHCP with Hostname ==== | ==== Enabling DHCP with Hostname ==== | ||
− | + | * To set the hostname, do the following: | |
− | + | ||
− | + | vi /etc/sysconfig/network | |
− | + | ||
− | + | * Edit /etc/sysconfig/network to look like the following: | |
− | + | ||
− | + | NETWORKING=yes | |
− | + | HOSTNAME={hostname}.hypersecuresolutions.com | |
− | + | ||
+ | * Save and exit. | ||
+ | |||
+ | * Then edit your ifcfg-eth0 config file with the following command: | ||
+ | |||
+ | vi /etc/sysconfig/network-scripts/ifcfg-eth0 | ||
+ | |||
+ | * Edit /etc/sysconfig/network-scripts/ifcfg-eth0 to look like the following: | ||
+ | |||
DEVICE=eth0 | DEVICE=eth0 | ||
BOOTPROTO=dhcp | BOOTPROTO=dhcp | ||
Line 19: | Line 27: | ||
PEERDNS=yes | PEERDNS=yes | ||
IPV6INIT=no | IPV6INIT=no | ||
− | *Save and exit. | + | |
− | Next, type in the following on the command promt to set hostname: | + | * Save and exit. |
+ | |||
+ | * Next, type in the following on the command promt to set hostname: | ||
+ | |||
hostname {hostname}.hypersecuresolutions.com | hostname {hostname}.hypersecuresolutions.com | ||
− | |||
− |
Latest revision as of 01:29, 19 March 2006
Enabling DHCP with Hostname
- To set the hostname, do the following:
vi /etc/sysconfig/network
- Edit /etc/sysconfig/network to look like the following:
NETWORKING=yes HOSTNAME={hostname}.hypersecuresolutions.com
- Save and exit.
- Then edit your ifcfg-eth0 config file with the following command:
vi /etc/sysconfig/network-scripts/ifcfg-eth0
- Edit /etc/sysconfig/network-scripts/ifcfg-eth0 to look like the following:
DEVICE=eth0 BOOTPROTO=dhcp HWADDR=00:E0:81:63:99:81 # This line is different for every card ONBOOT=yes TYPE=Ethernet DHCP_HOSTNAME={hostname} USERCTL=no PEERDNS=yes IPV6INIT=no
- Save and exit.
- Next, type in the following on the command promt to set hostname:
hostname {hostname}.hypersecuresolutions.com