Difference between revisions of "KVM"
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | == Installation Guides == | ||
| + | *[https://www.howtoforge.com/virtualization-with-kvm-on-a-debian-squeeze-server Debian 7/8 ] | ||
| + | *[https://www.cyberciti.biz/faq/install-kvm-server-debian-linux-9-headless-server/ Debian 9] | ||
| + | |||
| + | == Example of /etc/network/interfaces == | ||
| + | # This file describes the network interfaces available on your system | ||
| + | # and how to activate them. For more information, see interfaces(5). | ||
| + | |||
| + | source /etc/network/interfaces.d/* | ||
| + | |||
| + | # The loopback network interface | ||
| + | auto lo | ||
| + | iface lo inet loopback | ||
| + | |||
| + | # The primary network interface | ||
| + | auto eth0 | ||
| + | iface eth0 inet manual | ||
| + | |||
| + | # Management IP Address | ||
| + | auto br0 | ||
| + | iface br0 inet static | ||
| + | address 192.168.1.2 | ||
| + | netmask 255.255.255.0 | ||
| + | network 192.168.1.0 | ||
| + | broadcast 192.168.1.255 | ||
| + | gateway 192.168.1.1 | ||
| + | bridge_ports eth0 | ||
| + | bridge_fd 9 | ||
| + | bridge_hello 2 | ||
| + | bridge_maxage 12 | ||
| + | bridge_stp off | ||
| + | dns-nameservers 8.8.8.8 | ||
| + | dns-search ggeng.triumf.ca | ||
| + | |||
| + | # Unused | ||
| + | auto br1 | ||
| + | iface br1 inet static | ||
| + | address 0.0.0.0 | ||
| + | bridge_ports eth1 | ||
| + | bridge_fd 9 | ||
| + | bridge_hello 2 | ||
| + | bridge_maxage 12 | ||
| + | bridge_stp off | ||
| + | |||
| + | Restart the network: | ||
| + | systemctl restart network | ||
| + | |||
| + | == Manually adding bridges == | ||
| + | |||
| + | Create a bridge that is not listed in /etc/network/interfaces | ||
| + | brctl addbr br1 | ||
| + | |||
| + | Assign Ethernet to bridge: | ||
| + | brctl addif br1 eth1 | ||
| + | |||
| + | Confirm bridge is listed and working: | ||
| + | brctl show | ||
| + | |||
| + | == Virsh Commands == | ||
List all VM: | List all VM: | ||
virsh -c qemu:///system list | virsh -c qemu:///system list | ||
Latest revision as of 22:10, 22 March 2019
Contents
Installation Guides
Example of /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet manual
# Management IP Address
auto br0
iface br0 inet static
address 192.168.1.2
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
bridge_ports eth0
bridge_fd 9
bridge_hello 2
bridge_maxage 12
bridge_stp off
dns-nameservers 8.8.8.8
dns-search ggeng.triumf.ca
# Unused
auto br1
iface br1 inet static
address 0.0.0.0
bridge_ports eth1
bridge_fd 9
bridge_hello 2
bridge_maxage 12
bridge_stp off
Restart the network:
systemctl restart network
Manually adding bridges
Create a bridge that is not listed in /etc/network/interfaces
brctl addbr br1
Assign Ethernet to bridge:
brctl addif br1 eth1
Confirm bridge is listed and working:
brctl show
Virsh Commands
List all VM:
virsh -c qemu:///system list
Auto Start:
virsh autostart vmName
